Save 30% with code SQUARE·or save 40% with Subscribe & save

Harvest COA vs Finished-Product COA: What's the Difference?

How to tell a crop or biomass lab report from the report for the oil, gummy, or topical in your hand — and why the first one does not describe the second.

Updated How we edit these guides

The short version

People share two different lab reports under the same name. One describes harvested plant material: flower, biomass, or a crop sample. The other describes a finished product: an oil, a gummy, a topical, or something similar.

Only the finished-product report describes the bottle, tin, or pack in your hand. A harvest report can be a real lab report and still say nothing about that package.

What a harvest report usually looks like

The sample line names the plant, not a product on a shelf: hemp, flower, biomass, or aerial plant material. Results are often a percent of dry weight. The cannabinoid lines belong to that plant sample.

Panels that only make sense after extraction are often missing. Residual solvents are the clearest example: there is nothing of that kind to measure until a solvent has been used. The report answers what was in this plant lot. It does not answer what is in this bottle.

What a finished-product report usually looks like

The sample line names something you can buy: an oil, a tincture, a gummy, or a topical. It often includes a product name and a strength. Results are often mg/mL or mg/g, so the numbers can be multiplied by the package size and compared with the front label.

A complete report also includes contaminant panels that belong to manufacturing as well as the farm. Residual solvents come after extraction. Heavy metals, pesticides, microbials, and mycotoxins belong on the report when it is complete.

For how to read those lines, use How to read a CBD COA, line by line. Many reports also name the lab and note an accreditation such as ISO/IEC 17025 in the header. What that accreditation covers is a separate question, covered in ISO 17025 versus an unaccredited lab.

How to tell which document you are holding

  • Read the sample or matrix description. Plant material and a finished product are different samples.
  • Check the units. Percent of dry weight points at a crop. mg/mL or mg/g points at a finished product.
  • See whether the product name and the form on the report match the package.
  • On an extracted oil, look for a residual-solvent panel. A harvest report often will not have one.
  • See whether the identifier next to the results is a farm or biomass lot rather than the lot printed on the finished label.

Match the finished report to the package

The lot number on the bottle is the identifier to compare. The finished-product report should carry that same batch number, or the lot number printed on the label. The lab's Sample ID is the lab's tracking number for the test. It is not the number on the label.

A production run can have its own finished-product report. This production run is the one named on the package you are holding, and the report in your hand should be the report for that run. The matching walkthrough is How to read a CBD COA, line by line.

Why a harvest report is not a substitute

A flower or biomass report can still be followed by extraction, dilution, flavoring, or a different production run. Residual solvents, if they are present, show up after extraction. Potency in the plant is not the milligram amount in the bottle.

The math, and the dry-weight hemp line, are on How to read a CBD COA, line by line and the full-spectrum under 0.3% THC explainer.

Red flags

  • An oil, gummy, or topical question answered with only a flower, biomass, or harvest PDF.
  • No product name and no form.
  • Units that do not match the form in your hand.
  • No lab name, no letterhead, and no contact for the lab.
  • A PDF a brand produced itself, with no lab contact.
  • A harvest test from a much earlier season, offered as if it described current finished stock.

FAQ

What is the difference between a harvest COA and a finished-product COA?

A harvest COA describes a sample of the plant: flower, biomass, or another crop sample. A finished-product COA describes something you can buy, such as an oil, a gummy, or a topical. Both documents are called a COA. Only the finished-product report describes the bottle, tin, or pack in your hand.

Can a hemp flower or biomass report stand in for the oil I bought?

No. A flower or biomass report answers what was in that plant lot. Extraction, dilution, flavoring, and a later production run can all happen after that sample was pulled. The oil needs the report for the finished product, not the report for the crop it started as.

How do I tell which kind of report I am looking at?

Read the sample description, the units, and whether a product name is on the page. A harvest report usually names hemp, flower, biomass, or aerial plant material and reports a percent of dry weight. A finished-product report usually names an oil, tincture, gummy, or topical and reports mg/mL or mg/g. If the form on the PDF does not match the package, the PDF is not the report for that package.

Which number on the report should match the bottle?

Match the lot number on the bottle to the batch number printed on the finished-product report. The lot number printed on the label is the same comparison. The lab's Sample ID tracks the test inside the lab. It is not the number on the label.

Where can I read a finished-product report line by line?

Use How to read a CBD COA, line by line. That page walks a finished-product report section by section: the header, the cannabinoid lines, and the contaminant panels.

Further reading

Two lists sit beside this page: COA-transparent CBD brands and lab-tested CBD oils.

For current state pages, open CBD laws by state.

When you are ready to pick a THC-free broad-spectrum oil, start with botanCBD Broad Spectrum CBD Oil Drops.

For current state pages, open the CBD laws hub.

Related reading

Keep going